Hiring an electrical and electronics drafter in Albuquerque, NM
Employers in New Mexico pay electrical and electronics drafters a median of $101,330 a year, with the middle half of the market between $79,750 and $120,520 (BLS OEWS, May 2025, SOC 17-3012). Filling it through recruitlocalpros is a flat engagement fee set by the seniority of the role rather than by salary or location, and it runs 30 to 50% lower than contingency: a contingency firm billing 20 to 30% of that median would charge roughly $20,266 to $30,399 on the first year salary alone. Our vetted recruiting partner handles sourcing, screening and placement end to end.
BLS does not publish a separate figure for this occupation in the Albuquerque, NM area, so the figures below cover New Mexico statewide rather than Albuquerque, NM on its own.
- $101,330median electrical and electronics drafters wage in New Mexicomiddle half $79,750 to $120,520
- $20,266 to $30,399what a contingency firm would bill on this role20 to 30% of first-year salary, at close
- 23 to 35 daystypical time to fill86% fill rate on active searches
What is that open role actually costing you?
- $1,949a week, every week the electrical and electronics drafter seat stays openthe budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce, at the New Mexico median
- $24,985absorbed by day 90where a contingency search would still be running
- 2 to 4 weeksbefore a strong candidate takes another offerusually from whoever was already in front of them
That weekly number is the budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce. Substitute your own loaded rate and it goes up, not down. BLS OEWS, May 2025, SOC 17-3012.
The talent market changed. Most hiring processes did not.
Why electrical and electronics drafter seats stay open in Albuquerque
This role does not normally require a degree, which widens the pool but also means every employer in the Albuquerque, NM area can reach it. Volume is not the constraint here. Reaching the people already doing the work well, who are not applying, is.
Where the strongest candidates actually are
The best available candidate for most roles is not looking. They are employed, doing well, and open to a move only if the right opening reaches them directly. Once they decide they are open, that window is 2 to 4 weeks. A search built on posting and waiting never reaches them inside it.
Why contingency search moves slowly
A contingency firm is paid only when a placement closes, which rewards volume over speed. The incentive is to forward more resumes, not to own one search to the end. That is how a 90 day search happens, and by then the strongest candidates have accepted offers elsewhere.
What a full-service search does differently
The search goes direct to passive candidates instead of waiting for applicants, and it is run end to end on your behalf by a vetted recruiting partner. Billing is tied to milestones in the search rather than to a percentage of salary at the end, so the incentive is your timeline. Searches typically fill in 23 to 35 days, at an 86% fill rate on active searches. Both are typical figures rather than promises.
From open role to placed hire in three steps
Discovery call
Fifteen minutes on the role, your environment, and what a strong candidate looks like where you work. Not a pitch.
Direct sourcing
The search goes to qualified people who are not on job boards and are quietly open to the right move. This is the step where most searches fail.
Shortlist review
Three to five pre-screened candidates, with the reasoning for each, instead of a stack of forwarded resumes.
Do Albuquerque residents in architecture and engineering work earn more than employers in the Albuquerque, NM area pay?
Albuquerque residents working in architecture and engineering occupations earn a median of $103,968 (Census ACS 5-year 2023, tables S2401 and B24011), against $98,440 as the median of the 21 wages BLS publishes for that same occupation group in the Albuquerque, NM area (BLS OEWS, May 2025), a difference of 6%, with the residents figure the higher of the two.
Both sides of that figure describe the whole architecture and engineering group, not this one role. In the Albuquerque, NM area the group covers 21 occupations BLS publishes a wage for, from architectural and civil drafters at $46,740 to electrical engineers at $163,720 (BLS OEWS, May 2025).
That comparison is between two different measures, not a pay gap. The two weight the same occupation group differently: the Census figure is the midpoint across the people who actually hold those jobs, so a group carrying a few very well paid occupations is pulled toward them, while the BLS figure is the midpoint across the 21 published occupation wages, which counts each of those occupations once whatever its headcount. Census also counts where people live and BLS counts where the jobs are, and the two cover different populations, Census the civilian employed population 16 and over, BLS wage-and-salary jobs only. Read the number against other cities, where the same definitional difference applies on both sides, rather than as a shortfall.
The two sit within 10% of each other, so residents of Albuquerque and employers across the metro are priced about the same in this field, and pay alone is unlikely to be what wins or loses this hire.
What does an electrical and electronics drafter earn here?
Place of work
What employers pay
| 25th percentile | $79,750 |
| Median | $101,330 |
| 75th percentile | $120,520 |
Half of electrical and electronics drafters in New Mexico earn between $79,750 and $120,520 (BLS OEWS, May 2025). A band set below $79,750 competes for the bottom quarter of the market. Occupation detail for SOC 17-3012 at O*NET OnLine.
Place of residence
What Albuquerque residents earn
$103,968
Median annual earnings of Albuquerque residents working in architecture and engineering occupations, 10,044 people (Census ACS 5-year 2023, tables S2401 and B24011). An occupation group rather than this one role, and where people live rather than where they work, so it is not the same measurement as the wages beside it.
What does the role actually involve?
Core tasks
- Draft detail and assembly drawings of design components, circuitry or printed circuit boards, using computer-assisted equipment or standard drafting techniques and devices.
- Draft working drawings, wiring diagrams, wiring connection specifications, or cross-sections of underground cables, as required for instructions to installation crew.
- Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
- Review completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
- Consult with engineers to discuss or interpret design concepts, or determine requirements of detailed working drawings.
Task statements for SOC 17-3012, O*NET OnLine 29.1.
Tools and technologies in demand
Autodesk AutoCAD, Autodesk Revit, Bentley MicroStation, Microsoft Excel, Microsoft Office software, Microsoft Outlook, NavisWorks Jetstream, Adobe Illustrator.
Flagged in demand or hot for SOC 17-3012 by O*NET OnLine 29.1. Useful as a screen, not as a checklist.
Is the talent actually in Albuquerque?
This is a job zone three: medium preparation needed occupation. Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree. O*NET OnLine, SOC 17-3012.
It does not require a degree, which widens the pool considerably. For context, 38.7% of Albuquerque adults hold one. Census ACS 5-year 2023, table S1501, residents of Albuquerque aged 25 and over.
The average Albuquerque commute runs 22.2 minutes, which is roughly how far your catchment reaches before candidates start saying no. 12.8% of Albuquerque workers already work from home, so a fully onsite requirement here is competing against that. Census ACS 5-year 2023, place-level commuting characteristics for Albuquerque.
How often do these jobs turn over?
In Bernalillo County, architectural, engineering and related services employs 4,768 and turns over 6.6% a quarter, with 555 hires against 454 separations. Average earnings in that industry run $8,116 a month. Census LEHD Quarterly Workforce Indicators, 2024 Q1, NAICS 5413.
That figure covers every occupation in the industry, not this role alone, so read it as the local churn rate rather than as a number about electrical and electronics drafters. It still tells you what you are hiring into: a low-churn market, where people do not move often and passive candidates are the whole game.
What does the search cost?
The fee is flat and set by the seniority of the role, never by salary and never by location. It is quoted as a range before the work starts, and it runs 30 to 50% lower than contingency. A contingency firm hiring at this role's $101,330 median in the Albuquerque, NM area (BLS OEWS, May 2025) would bill roughly $20,266 to $30,399 on the first year salary alone, and that bill climbs with every dollar added to the offer while a flat fee does not.
One owner runs the search from market map to signed offer. Searches typically fill in 23 to 35 days, at an 86% fill rate on active searches. Both are typical figures rather than promises. A 45 day replacement guarantee at 50% off runs on every placement.
Three things every employer wants and most firms do not offer
No contingency fee, ever
Common objection: “We already work with contingency recruiters.”
A contingency firm bills 20 to 30% of first-year salary as a lump sum when someone finally signs, so the fee rises with the salary rather than with the work. A fee set by the seniority of the seat does not, and lands 30 to 50% lower than contingency.
A 45 day replacement guarantee
Common objection: “What happens if the hire does not work out?”
If the placement does not hold inside 45 days of the start date, the replacement search runs at 50% off. Many contingency arrangements stop at 30 days, and some bill the second search at full price.
A shortlist, not a resume stack
Common objection: “We get plenty of candidates already.”
Volume is not the problem. Three to five screened candidates with the reasoning attached is a decision you can make this week. Forty forwarded resumes is work handed back to the person who already has an open seat.
Questions employers ask about hiring an electrical and electronics drafter in Albuquerque
- What does it cost to hire an electrical and electronics drafter in Albuquerque?
- A flat engagement fee set by the seniority of the role and never by salary or location, quoted as a range before the work starts and running 30 to 50% lower than contingency. A contingency firm billing 20 to 30% of this role's $101,330 median wage in New Mexico (BLS OEWS, May 2025) would charge roughly $20,266 to $30,399 on the first year salary alone.
- What should an offer for an electrical and electronics drafter in Albuquerque look like?
- Employers in New Mexico pay electrical and electronics drafters a median of $101,330, with the middle half of the market between $79,750 and $120,520 (BLS OEWS, May 2025). A band set below $79,750 competes for the bottom quarter of that market. These are New Mexico figures, because BLS withholds the Albuquerque, NM figure for this occupation.
- Do Albuquerque residents in architecture and engineering work earn more than employers in the Albuquerque, NM area pay?
- Albuquerque residents working in architecture and engineering occupations earn a median of $103,968 (Census ACS 5-year 2023, tables S2401 and B24011), against $98,440 as the median of the 21 wages BLS publishes for that same occupation group in the Albuquerque, NM area (BLS OEWS, May 2025), a difference of 6%. Both figures cover the whole occupation group rather than this one role, and one counts where people live while the other counts where the jobs are, so the percentage is not a pay gap.
- Is the talent for this role already in Albuquerque?
- This is a job zone 3 occupation and does not require a degree, which widens the pool considerably. For context, 38.7% of Albuquerque adults hold a bachelor's degree or higher (Census ACS 5-year 2023, table S1501).
Every week that seat stays open is a decision.
At the published median for this role, the wage line alone on the open electrical and electronics drafter seat is $1,949 a week and $24,985 by the point a 90 day contingency search would still be working. That is before overtime for whoever is covering it. A 23 to 35 days search closes that gap. A process built on job boards does not.
Hiring an electrical and electronics drafter somewhere else?
Same role, different market. The wage band moves with the metro.
- Hiring an electrical and electronics drafter in New York, NY
- Hiring an electrical and electronics drafter in Los Angeles, CA
- Hiring an electrical and electronics drafter in Chicago, IL
- Hiring an electrical and electronics drafter in Houston, TX
- Hiring an electrical and electronics drafter in Phoenix, AZ
- Hiring an electrical and electronics drafter in Philadelphia, PA
- Hiring an electrical and electronics drafter in San Antonio, TX
- Hiring an electrical and electronics drafter in San Diego, CA
- Hiring an electrical and electronics drafter in Dallas, TX
- Hiring an electrical and electronics drafter in Fort Worth, TX
- Hiring an electrical and electronics drafter in Jacksonville, FL
- Hiring an electrical and electronics drafter in Austin, TX
Other architecture and engineering roles in Albuquerque
- Aerospace Engineers in Albuquerque, NM
- Architects, Except Landscape and Naval in Albuquerque, NM
- Architectural and Civil Drafters in Albuquerque, NM
- Calibration Technologists and Technicians in Albuquerque, NM
- Chemical Engineers in Albuquerque, NM
- Civil Engineering Technologists and Technicians in Albuquerque, NM
- Civil Engineers in Albuquerque, NM
- Electrical and Electronic Engineering Technologists and Technicians in Albuquerque, NM
- Electrical Engineers in Albuquerque, NM
- Electronics Engineers, Except Computer in Albuquerque, NM
See your price before you talk to anyone.
Answer a few questions about the role and you get your own number on screen. No call required, no commitment, and nothing to unsubscribe from.