RecruitLocalPros

Hiring a machinist in Austin, TX

Employers in the Austin-Round Rock-San Marcos, TX area pay machinists a median of $59,030 a year, with the middle half of the market between $49,230 and $73,040 (BLS OEWS, May 2025, SOC 51-4041). Filling it through recruitlocalpros is a flat engagement fee set by the seniority of the role rather than by salary or location, and it runs 30 to 50% lower than contingency: a contingency firm billing 20 to 30% of that median would charge roughly $11,806 to $17,709 on the first year salary alone. Our vetted recruiting partner handles sourcing, screening and placement end to end.

What is that open role actually costing you?

  • $1,135a week, every week the machinist seat stays openthe budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce, at the the Austin-Round Rock-San Marcos, TX area median
  • $14,555absorbed by day 90where a contingency search would still be running
  • 2 to 4 weeksbefore a strong candidate takes another offerusually from whoever was already in front of them

That weekly number is the budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce. Substitute your own loaded rate and it goes up, not down. BLS OEWS, May 2025, SOC 51-4041.

The talent market changed. Most hiring processes did not.

Why machinist seats stay open in Austin

This role does not normally require a degree, which widens the pool but also means every employer in the Austin-Round Rock-San Marcos, TX area can reach it. Volume is not the constraint here. Reaching the people already doing the work well, who are not applying, is.

Where the strongest candidates actually are

The best available candidate for most roles is not looking. They are employed, doing well, and open to a move only if the right opening reaches them directly. Once they decide they are open, that window is 2 to 4 weeks. A search built on posting and waiting never reaches them inside it.

Why contingency search moves slowly

A contingency firm is paid only when a placement closes, which rewards volume over speed. The incentive is to forward more resumes, not to own one search to the end. That is how a 90 day search happens, and by then the strongest candidates have accepted offers elsewhere.

What a full-service search does differently

The search goes direct to passive candidates instead of waiting for applicants, and it is run end to end on your behalf by a vetted recruiting partner. Billing is tied to milestones in the search rather than to a percentage of salary at the end, so the incentive is your timeline. Searches typically fill in 23 to 35 days, at an 86% fill rate on active searches. Both are typical figures rather than promises.

From open role to placed hire in three steps

01

Discovery call

Fifteen minutes on the role, your environment, and what a strong candidate looks like where you work. Not a pitch.

02

Direct sourcing

The search goes to qualified people who are not on job boards and are quietly open to the right move. This is the step where most searches fail.

03

Shortlist review

Three to five pre-screened candidates, with the reasoning for each, instead of a stack of forwarded resumes.

Do Austin residents in production work earn more than employers in the Austin-Round Rock-San Marcos, TX area pay?

Austin residents working in production occupations earn a median of $40,856 (Census ACS 5-year 2023, tables S2401 and B24011), against $53,645 as the median of the 4 wages BLS publishes for that same occupation group in the Austin-Round Rock-San Marcos, TX area (BLS OEWS, May 2025), a difference of 24%, with the employers figure the higher of the two.

Both sides of that figure describe the whole production group, not this one role. In the Austin-Round Rock-San Marcos, TX area the group covers 4 occupations BLS publishes a wage for, from miscellaneous assemblers and fabricators at $39,850 to first-line supervisors of production and operating workers at $71,470 (BLS OEWS, May 2025), with machinists at $59,030 inside it.

That comparison is between two different measures, not a pay gap. The two weight the same occupation group differently: the Census figure is the midpoint across the people who actually hold those jobs, so a group carrying a few very well paid occupations is pulled toward them, while the BLS figure is the midpoint across the 4 published occupation wages, which counts each of those occupations once whatever its headcount. Census also counts where people live and BLS counts where the jobs are, and the two cover different populations, Census the civilian employed population 16 and over, BLS wage-and-salary jobs only. Read the number against other cities, where the same definitional difference applies on both sides, rather than as a shortfall.

Published wages across this group in the metro run above what Austin residents in it earn, which usually means employers here draw this talent from beyond the city line rather than from inside it.

What does a machinist earn here?

Place of work

What employers pay

Annual wages paid to machinists by employers in the Austin-Round Rock-San Marcos, TX area. BLS OEWS, May 2025, SOC 51-4041.
25th percentile$49,230
Median$59,030
75th percentile$73,040

Half of machinists in the Austin-Round Rock-San Marcos, TX area earn between $49,230 and $73,040 (BLS OEWS, May 2025). A band set below $49,230 competes for the bottom quarter of the market. Occupation detail for SOC 51-4041 at O*NET OnLine.

Place of residence

What Austin residents earn

$40,856

Median annual earnings of Austin residents working in production occupations, 13,820 people (Census ACS 5-year 2023, tables S2401 and B24011). An occupation group rather than this one role, and where people live rather than where they work, so it is not the same measurement as the wages beside it.

What does the role actually involve?

Core tasks

  • Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
  • Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
  • Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
  • Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
  • Program computers or electronic instruments, such as numerically controlled machine tools.

Task statements for SOC 51-4041, O*NET OnLine 29.1.

Tools and technologies in demand

G-code, Autodesk AutoCAD, Dassault Systemes SolidWorks, Microsoft Excel, Microsoft Office software, Microsoft Outlook, Microsoft PowerPoint, Microsoft Word.

Flagged in demand or hot for SOC 51-4041 by O*NET OnLine 29.1. Useful as a screen, not as a checklist.

Is the talent actually in Austin?

This is a job zone three: medium preparation needed occupation. Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree. O*NET OnLine, SOC 51-4041.

It does not require a degree, which widens the pool considerably. For context, 58.2% of Austin adults hold one. Census ACS 5-year 2023, table S1501, residents of Austin aged 25 and over.

The average Austin commute runs 24 minutes, which is roughly how far your catchment reaches before candidates start saying no. 27.5% of Austin workers already work from home, so a fully onsite requirement here is competing against that. Census ACS 5-year 2023, place-level commuting characteristics for Austin.

How often do these jobs turn over?

In Travis County, manufacturing employs 52,594 and turns over 5.3% a quarter, with 3,634 hires against 3,717 separations. Average earnings in that industry run $11,444 a month. Census LEHD Quarterly Workforce Indicators, 2024 Q1, NAICS 31-33.

That figure covers every occupation in the industry, not this role alone, so read it as the local churn rate rather than as a number about machinists. It still tells you what you are hiring into: a low-churn market, where people do not move often and passive candidates are the whole game.

What does the search cost?

The fee is flat and set by the seniority of the role, never by salary and never by location. It is quoted as a range before the work starts, and it runs 30 to 50% lower than contingency. A contingency firm hiring at this role's $59,030 median in the Austin-Round Rock-San Marcos, TX area (BLS OEWS, May 2025) would bill roughly $11,806 to $17,709 on the first year salary alone, and that bill climbs with every dollar added to the offer while a flat fee does not.

One owner runs the search from market map to signed offer. Searches typically fill in 23 to 35 days, at an 86% fill rate on active searches. Both are typical figures rather than promises. A 45 day replacement guarantee at 50% off runs on every placement.

Three things every employer wants and most firms do not offer

No contingency fee, ever

Common objection: “We already work with contingency recruiters.”

A contingency firm bills 20 to 30% of first-year salary as a lump sum when someone finally signs, so the fee rises with the salary rather than with the work. A fee set by the seniority of the seat does not, and lands 30 to 50% lower than contingency.

A 45 day replacement guarantee

Common objection: “What happens if the hire does not work out?”

If the placement does not hold inside 45 days of the start date, the replacement search runs at 50% off. Many contingency arrangements stop at 30 days, and some bill the second search at full price.

A shortlist, not a resume stack

Common objection: “We get plenty of candidates already.”

Volume is not the problem. Three to five screened candidates with the reasoning attached is a decision you can make this week. Forty forwarded resumes is work handed back to the person who already has an open seat.

Questions employers ask about hiring a machinist in Austin

What does it cost to hire a machinist in Austin?
A flat engagement fee set by the seniority of the role and never by salary or location, quoted as a range before the work starts and running 30 to 50% lower than contingency. A contingency firm billing 20 to 30% of this role's $59,030 median wage in the Austin-Round Rock-San Marcos, TX area (BLS OEWS, May 2025) would charge roughly $11,806 to $17,709 on the first year salary alone.
What should an offer for a machinist in Austin look like?
Employers in the Austin-Round Rock-San Marcos, TX area pay machinists a median of $59,030, with the middle half of the market between $49,230 and $73,040 (BLS OEWS, May 2025). A band set below $49,230 competes for the bottom quarter of that market.
Do Austin residents in production work earn more than employers in the Austin-Round Rock-San Marcos, TX area pay?
Austin residents working in production occupations earn a median of $40,856 (Census ACS 5-year 2023, tables S2401 and B24011), against $53,645 as the median of the 4 wages BLS publishes for that same occupation group in the Austin-Round Rock-San Marcos, TX area (BLS OEWS, May 2025), a difference of 24%. Both figures cover the whole occupation group rather than this one role, and one counts where people live while the other counts where the jobs are, so the percentage is not a pay gap.
Is the talent for this role already in Austin?
This is a job zone 3 occupation and does not require a degree, which widens the pool considerably. For context, 58.2% of Austin adults hold a bachelor's degree or higher (Census ACS 5-year 2023, table S1501).

Every week that seat stays open is a decision.

At the published median for this role, the wage line alone on the open machinist seat is $1,135 a week and $14,555 by the point a 90 day contingency search would still be working. That is before overtime for whoever is covering it. A 23 to 35 days search closes that gap. A process built on job boards does not.

See your price before you talk to anyone.

Answer a few questions about the role and you get your own number on screen. No call required, no commitment, and nothing to unsubscribe from.

23 to 35 days to fill. 86% fill rate on active searches.

Connect with us

Follow RecruitLocalPros