Assembler Salary by Metro: $30,920 to $60,250
Across the 91 US metro areas where BLS publishes a figure for this occupation, the median assembler wage runs from $30,920 in the lowest-paying metro to $60,250 in the highest (BLS OEWS, May 2025). Where you hire moves this number more than how senior the hire is: the gap between the cheapest and the dearest metro is wider than the gap between a 25th and a 75th percentile assembler inside a typical one, which runs $37,400 to $49,170. Setting the band is the easy half. RecruitLocalPros hands the requisition to a vetted recruiting partner who runs the search end to end, typically filling in 23 to 35 days on milestone billing rather than a percentage of salary.
- 23 to 35 daysto fill a roletypical, not a promise
- 86%fill rateon active searches
- 30 to 50%lower than contingency2 to 3x faster
What is that open role actually costing you?
- $846a week, every week the assembler seat stays openthe budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce
- $10,842absorbed by day 90where a contingency search would still be running
- 2 to 4 weeksbefore a strong candidate takes another offerusually from whoever was already in front of them
That weekly number is the budgeted wage for the seat, before overtime for the people covering it or the output the seat was meant to produce. Substitute your own loaded rate and it goes up, not down. BLS OEWS, May 2025, SOC 51-2090, the midpoint of the 91 US metro medians published for this role.
The talent market changed. Most hiring processes did not.
Why miscellaneous assemblers and fabricators seats stay open
BLS OEWS, May 2025 publishes a median for miscellaneous assemblers and fabricators in 91 metro areas, spanning $30,920 to $60,250 a year. A band set near the bottom of that spread in a metro that pays the top of it is the most common reason the seat is still open, and a market map catches it in week one rather than in month three.
Where the strongest candidates actually are
The best available candidate for most roles is not looking. They are employed, doing well, and open to a move only if the right opening reaches them directly. Once they decide they are open, that window is 2 to 4 weeks. A search built on posting and waiting never reaches them inside it.
Why contingency search moves slowly
A contingency firm is paid only when a placement closes, which rewards volume over speed. The incentive is to forward more resumes, not to own one search to the end. That is how a 90 day search happens, and by then the strongest candidates have accepted offers elsewhere.
What a full-service search does differently
The search goes direct to passive candidates instead of waiting for applicants, and it is run end to end on your behalf by a vetted recruiting partner. Billing is tied to milestones in the search rather than to a percentage of salary at the end, so the incentive is your timeline. Searches typically fill in 23 to 35 days, at an 86% fill rate on active searches. Both are typical figures rather than promises.
From open role to placed hire in three steps
Discovery call
Fifteen minutes on the role, your environment, and what a strong candidate looks like where you work. Not a pitch.
Direct sourcing
The search goes to qualified people who are not on job boards and are quietly open to the right move. This is the step where most searches fail.
Shortlist review
Three to five pre-screened candidates, with the reasoning for each, instead of a stack of forwarded resumes.
What do miscellaneous assemblers and fabricators do?
O*NET does not publish a task list for this specific occupation code. The 51 field it sits in covers related planning, coordination and execution work for employers in that function.
What does it take to become one?
O*NET does not publish a job zone for this specific occupation code.
What do miscellaneous assemblers and fabricators get paid?
BLS OEWS, May 2025 publishes a wage for miscellaneous assemblers and fabricators in 91 US metro areas. The median ranges from $30,920 to $60,250 a year depending on the metro, with a midpoint of $43,970. This is what employers pay, place of work, not a single national figure and not what any one person takes home.
BLS OEWS, BLS OEWS, May 2025, SOC 51-2090.
Milestone billing against contingency: why it changes your search
A contingency firm billing 20 to 30% of the typical assembler's $43,970 median would charge $8,794 to $13,191 on the first year salary alone, due at close. BLS OEWS, May 2025, SOC 51-2090, the midpoint of the 91 US metro medians published for this role. Here is how the two models compare on everything that decides whether the seat gets filled.
| Factor | Full-service search | Contingency recruiter |
|---|---|---|
| Payment structure | Milestones tied to progress in the search | Lump sum at close, 20 to 30% of first-year salary |
| Cost | 30 to 50% lower than contingency | $8,794 to $13,191 on this role |
| What the incentive rewards | Closing one search on your timeline | Submitting volume until something sticks |
| Candidates you see | Three to five, screened, with reasoning | As many as the firm can forward |
| Time to fill | 23 to 35 days, typical | 90+ days |
| If it does not work out | 45 day replacement at 50% off | Commonly 30 days, sometimes billed again |
| Who owns the outcome | One owner, market map to signed offer | Nobody in particular |
What does hiring one cost?
The same as any role: the seniority of the seat sets the fee, not location and not salary. It is quoted as a range before the work starts, and it runs 30 to 50% lower than contingency. For scale, the highest-paying metro in the country for miscellaneous assemblers and fabricators has a median of $60,250 a year, place of work (BLS OEWS, May 2025). A contingency firm hiring at that level would bill roughly $12,050 to $18,075 on the first year salary alone, 20 to 30%.
Industries that run this search
The same occupation sits in different places depending on the business. Open the industry you are hiring into to see what that market pays and how the rest of the ladder is staffed.
Three things every employer wants and most firms do not offer
No contingency fee, ever
Common objection: โWe already work with contingency recruiters.โ
A contingency firm bills 20 to 30% of first-year salary as a lump sum when someone finally signs, so the fee rises with the salary rather than with the work. A fee set by the seniority of the seat does not, and lands 30 to 50% lower than contingency.
A 45 day replacement guarantee
Common objection: โWhat happens if the hire does not work out?โ
If the placement does not hold inside 45 days of the start date, the replacement search runs at 50% off. Many contingency arrangements stop at 30 days, and some bill the second search at full price.
A shortlist, not a resume stack
Common objection: โWe get plenty of candidates already.โ
Volume is not the problem. Three to five screened candidates with the reasoning attached is a decision you can make this week. Forty forwarded resumes is work handed back to the person who already has an open seat.
Every week that seat stays open is a decision.
At the published median for this role, the wage line alone on the open assembler seat is $846 a week and $10,842 by the point a 90 day contingency search would still be working. That is before overtime for whoever is covering it. A 23 to 35 days search closes that gap. A process built on job boards does not.
Common questions about hiring miscellaneous assemblers and fabricators
What do employers pay miscellaneous assemblers and fabricators?
What would a contingency firm charge to fill an assembler seat?
What should an assembler shortlist require?
Where do you run miscellaneous assemblers and fabricators searches?
How fast can an assembler search fill?
What if an assembler hire does not work out?
What kinds of roles get placed?
How is this different from a staffing agency?
Is this the same as talent acquisition or direct hire?
How fast can a role be filled?
How is pricing structured?
What if the hire does not work out?
How do you reach candidates who are not applying?
Can several roles run at once?
What is needed to start a search?
Who actually runs the search?
Price an assembler search
Eight questions about the role. Your own range appears on screen, with the contingency comparison if you are paying one now.
Where we recruit miscellaneous assemblers and fabricators
The fee does not move with the city. The wage band does, so each page prices the role against what that metro actually pays.
- Hiring assemblers in New York, NY
- Recruiting assemblers in Los Angeles, CA
- Assembler pay and hiring in Chicago, IL
- Hiring an assembler in Houston, TX
- Hiring assemblers in Phoenix, AZ
- Recruiting assemblers in Philadelphia, PA
- Assembler pay and hiring in San Antonio, TX
- Hiring an assembler in San Diego, CA
- Hiring assemblers in Dallas, TX
- Recruiting assemblers in Fort Worth, TX
- Assembler pay and hiring in Jacksonville, FL
- Hiring an assembler in Austin, TX
- Hiring assemblers in San Jose, CA
- Recruiting assemblers in Charlotte, NC
- Assembler pay and hiring in Columbus, OH
- Hiring an assembler in Indianapolis, IN
- Hiring assemblers in San Francisco, CA
- Recruiting assemblers in Seattle, WA
- Assembler pay and hiring in Denver, CO
- Hiring an assembler in Nashville, TN
- Hiring assemblers in Oklahoma City, OK
- Recruiting assemblers in Washington, DC
- Assembler pay and hiring in El Paso, TX
- Hiring an assembler in Las Vegas, NV
- Hiring assemblers in Boston, MA
- Recruiting assemblers in Detroit, MI
- Assembler pay and hiring in Louisville, KY
- Hiring an assembler in Portland, OR
- Hiring assemblers in Memphis, TN
- Recruiting assemblers in Baltimore, MD
- Assembler pay and hiring in Milwaukee, WI
- Hiring an assembler in Albuquerque, NM
- Hiring assemblers in Fresno, CA
- Recruiting assemblers in Tucson, AZ
- Assembler pay and hiring in Sacramento, CA
- Hiring an assembler in Atlanta, GA
- Hiring assemblers in Kansas City, MO
- Recruiting assemblers in Mesa, AZ
- Assembler pay and hiring in Raleigh, NC
- Hiring an assembler in Colorado Springs, CO
- Hiring assemblers in Miami, FL
- Recruiting assemblers in Omaha, NE
- Assembler pay and hiring in Virginia Beach, VA
- Hiring an assembler in Long Beach, CA
- Hiring assemblers in Oakland, CA
- Recruiting assemblers in Minneapolis, MN
- Assembler pay and hiring in Bakersfield, CA
- Hiring an assembler in Tulsa, OK
- Hiring assemblers in Tampa, FL
- Recruiting assemblers in Aurora, CO
- Assembler pay and hiring in Arlington, TX
- Hiring an assembler in Wichita, KS
- Hiring assemblers in Cleveland, OH
- Recruiting assemblers in New Orleans, LA
- Assembler pay and hiring in Henderson, NV
- Hiring an assembler in Honolulu, HI
- Hiring assemblers in Anaheim, CA
- Recruiting assemblers in Orlando, FL
- Assembler pay and hiring in Lexington, KY
- Hiring an assembler in Stockton, CA
- Hiring assemblers in Newark, NJ
- Recruiting assemblers in Riverside, CA
- Assembler pay and hiring in Irvine, CA
- Hiring an assembler in Corpus Christi, TX
- Hiring assemblers in Santa Ana, CA
- Recruiting assemblers in Cincinnati, OH
- Assembler pay and hiring in Greensboro, NC
- Hiring an assembler in Pittsburgh, PA
- Hiring assemblers in St. Paul, MN
- Recruiting assemblers in Durham, NC
- Assembler pay and hiring in Jersey City, NJ
- Hiring an assembler in Lincoln, NE
- Hiring assemblers in North Las Vegas, NV
- Recruiting assemblers in Plano, TX
- Assembler pay and hiring in Gilbert, AZ
- Hiring an assembler in Anchorage, AK
- Hiring assemblers in Madison, WI
- Recruiting assemblers in Reno, NV
- Assembler pay and hiring in Chandler, AZ
- Hiring an assembler in St. Louis, MO
- Hiring assemblers in Chula Vista, CA
- Recruiting assemblers in Fort Wayne, IN
- Assembler pay and hiring in Buffalo, NY
- Hiring an assembler in Lubbock, TX
- Hiring assemblers in Laredo, TX
- Recruiting assemblers in Port St. Lucie, FL
- Assembler pay and hiring in St. Petersburg, FL
- Hiring an assembler in Toledo, OH
- Hiring assemblers in Glendale, AZ
- Recruiting assemblers in Winston-Salem, NC
- Assembler pay and hiring in Irving, TX
- Hiring an assembler in Chesapeake, VA
- Hiring assemblers in Garland, TX
- Recruiting assemblers in Scottsdale, AZ
- Assembler pay and hiring in Boise, ID
- Hiring an assembler in Richmond, VA
- Hiring assemblers in Frisco, TX
- Recruiting assemblers in Cape Coral, FL
- Assembler pay and hiring in McKinney, TX
- Hiring an assembler in Huntsville, AL
- Hiring assemblers in Norfolk, VA
- Recruiting assemblers in Hialeah, FL
- Assembler pay and hiring in Spokane, WA
- Hiring an assembler in Tacoma, WA
- Hiring assemblers in Santa Clarita, CA
- Recruiting assemblers in Fremont, CA
- Assembler pay and hiring in Baton Rouge, LA
- Hiring an assembler in San Bernardino, CA
- Hiring assemblers in Fontana, CA
- Recruiting assemblers in Modesto, CA
- Assembler pay and hiring in Salt Lake City, UT
- Hiring an assembler in Moreno Valley, CA
- Hiring assemblers in Worcester, MA
- Recruiting assemblers in Sioux Falls, SD
- Assembler pay and hiring in Yonkers, NY
- Hiring an assembler in Des Moines, IA
- Hiring assemblers in Grand Prairie, TX
- Recruiting assemblers in Fayetteville, NC
- Assembler pay and hiring in Little Rock, AR
- Hiring an assembler in Rochester, NY
- Hiring assemblers in Amarillo, TX
- Recruiting assemblers in Tallahassee, FL
- Assembler pay and hiring in Overland Park, KS
- Hiring an assembler in Columbus, GA
- Hiring assemblers in Knoxville, TN
- Recruiting assemblers in Augusta, GA
- Assembler pay and hiring in Grand Rapids, MI
- Hiring an assembler in Peoria, AZ
- Hiring assemblers in Mobile, AL
See your price before you talk to anyone.
Answer a few questions about the role and you get your own number on screen. No call required, no commitment, and nothing to unsubscribe from.